Dynojet's Quick Shifter (DQS) kit allows full-throttle, clutchless upshifts in racing and performance riding applications
Shift rod pressure/tension sensor kit is a universal sensor that mounts to the shift rod in either a push or pull configuration; requires modification of gear-linkage tie-rod
Linear travel sensor kit works with bikes that have no shift rod, or on those the shift rod sensor will not fit, by mounting one end to the shift lever and the other to a fixed point on the chassis; available in push or pull types with universal mounting hardware
Plugs directly into the Power Commander expansion port with no re-wiring required
Power Commander Control Center software lets you set engine dead time during upshifts and minimum rpm for system operation
PART #s 1601-0011 and 1601-0012 are "pressure style" sensors for PCIII USB
PART #s 1601-0244 and 1601-0245 are "pressure style" sensors for PCV
PART #s 1601-0013 and 1601-0014 are "linear" sensors for PCIII USB
PART #s 1601-0246 and 1601-0247 are "linear" sensors for PCV
NOTE: To order either of the above sensors, you must find the correct direction of movement during an upshift (push or pull). For the shift rod/pressure/tension sensor, press on the shift lever in the direction of an upshift to see if the rod is pushing or pulling on the clevis on the shift shaft. For the linear travel sensor, also move the shifter for an upshift. If movement is down, a pull sensor is needed. If movement is up, a push sensor is required.
By checking the box and clicking continue below, the individual acknowledges and agrees to the following terms and conditions:
In order for performance components to be listed “for use on a public highway” there is an approval process that needs to be met. This approval
process varies based on the component (e.g. the process for a head lamp bulb and an exhaust system is entirely different). If a product manufacturer opts
not to obtain approval for use on a public highway, the part is labeled and is intended for “off-road use only”.
Performance components that have been approved for use on a public roads are badged on www.fuelmotousa.com with the STREET LEGAL stamp and are U.S. 49-State legal manufacturer declared emissions replacement parts.
Performance components not approved for use on public roads are badged on www.fuelmotousa.com with the OFF-ROAD USE stamp are not legal to use and operate on public roads. Fuel Moto Inc. or www.fuelmotousa.com hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance product. Items sold for off-road use only are not legal in many states and provinces and are not intended for use on a public road.
By purchasing any aftermarket performance product, the customer takes full responsibility for any use, and/or misuse of the product and agrees that Fuel
Moto Inc or www.fuelmotousa.com holds no responsibility for any consequences, legal, or other, of such use and/or misuse. The use of performance modifications may violate warranties from the manufacturer of the vehicle or from others. Use of this product for purposes other than solely for competition is a violation of federal law and may violate applicable state or local environmental, motor vehicle and other laws.
Our Best Pricing
Manufacturers occasionally suggest that products be advertised at their suggested retail price. Because our price on this item is lower than the manufacturer's "minimum advertised price", the manufacturer does not allow us to show you our price until you place the item in your shopping cart.
Please note that this does not require you to purchase the product. You can easily remove it from your shopping cart if you decide not to buy it. We realize that this is an inconvenience and are regularly working with manufactures on how their policies impact our customers.
Please contact us at 920-423-3309 Mon-Fri between 9-5 CST with any questions or for additional support.