Click on image to zoom

Andrews 64HG Gear Drive Camshafts with Fuel Moto Complete Install Kit

Not Available


Series HG gear drive cams are made for ALL (’07 - up) Twin cam engines and ’06 DynaGlides. They have been designed to run with new 2007 S&S gear drives. The cam lobe designs listed below are the same as those manufactured for 1999-2006 engines. Gear drives made for ’99-2006 engines will not fit (2007 - up) Twin cam engines or 2006 Dyna engines. HG cam installation kits include two plates for blocking lubricating oil feed holes which were intended for stock chain drives, not 2007 style gear drives. Performance gains with the HG cams listed will be similar to ’99-’06 engines running with the same cam grinds.

Big cams for modified 96 - 120+ inch motors running 10:2 CR or higher. Heads must be set for .700 lift and modified for max air flow. (3000-6500+ RPM).

Open Close Lift Duration TDC Lift
INT 30 62 .640 272 .262
EX 66 30 .640 276 .232

For technical camshaft information along with detailed product support, please visit our Performance Cams page.

Product Series

Application List

Fitment for 216364G_FM-CAMKIT_LIFTERS

Application List

Fitment for 216364G_FM-CAMKIT_LIFTERS


  • Andrews
  • New


Shipping Information

  • Item Requires Shipping
  • 8.0 lbs.
  • W15.0000” x H8.0000” x L10.0000”
  • Free Ground Shipping