Gear driven camshafts typically have a higher initial expense as in addition to the camshafts themselves gears and installation kits are required. As gear driven camshafts require almost perfect crank run out typically their installation also requires bottom end servicing. Gear driven camshafts also require greater valve timing accuracy due to the precision required for their use. With this said, if initial cost and valve train noise are not part of your decision process, gear driven camshafts do offer the highest level of reliability and are often utilized in higher displacement engines for this very reason.
Regardless of displacement or compression ratio with a stock starter, Easy Start Cams from S&S® Cycle make hard starting obsolete for big twins. Available in chain drive and gear drive versions. Don't get caught "dead" without them! More Proven Performance® from S&S Cycle, Inc., the leader in V-Twin high performance parts since 1958.
The 625 cam is designed for 95 inch or larger engines with compression ratios between 10.0 and 10.75:1.
For technical camshaft information along with detailed product support, please visit our Performance Cams page.