Fuel Moto Lollipop Exhaust Diffuser Baffle Insert

Fuel Moto lollipop exhaust diffuser baffle insert

An old school solution for the age old problem; exhaust reversion. Originally developed and used in the 60's by drag racers with open pipes these lollipop inserts are installed to maintain exhaust velocity and reduce the effects of reversion. They work especially well with larger than optimal baffles to increase and smooth low RPM power & throttle response. These are not new or revolutionary, they are simply another alternative to help remedy an under-performing exhaust system. They are universal fitment for 2"-3" baffle cores and perform best when installed 2-4" inches from the outlet of the exhaust system. They are installed by drilling a mounting hole in the baffle core or exhaust pipe and the insert can be adjusted like a valve by turning it with or against the exhaust flow, this will increase or decrease diffusion and also sound level. Specs are shown if you want to fabricate your own. 

• Sold each, works in slip on mufflers and in 2/1 systems
• Universal fitment; recommended for 2"-3" baffles
• reduces reversion with large baffles
• Dyno proven! increases tunability, helps low RPM dip power curve when needed
• Stainless Steel construction & hardware