Arlen Ness - Bolt-On Turn Signals With Power LEDs


  • Compact billet design flows nicely into rear fender struts or front signal mounts
  • Feature Power LEDs, which give off as much light as 25-30 conventional LEDs
  • 12 volt, dual-function design
  • Rear lights measure approximately 2.5" L x .900" W with 8mm/5/16" x 1.75" mounting studs
  • Front lights measure approximately 2.18" L x 1.3" W and are tapped 5/16"-18 mounting studs
  • Sold in pairs
  • Not DOT certified
  • If being used as turn signals, a load equalizer may be required