|
Dynojet Power
Commander V for Japanese models
Fuel Moto is the #1
Dynojet Power Commander dealer and Tuning center in the USA!
Fuel Moto
offers 100% product support on the new Dynojet Power Commander V. We
are continuing to build our map database and we support fuel maps
for most popular combinations. We will program your PC-V for your
specific mods so it is ready to install and ride. Fuel Moto also
doubles the warranty on the PC-V. For those of you with unique
modifications, or are looking for live tuning we offer the Dynojet Auto Tune module
for PC-V with wideband O2 sensor (dual sensors on V Twin models)
which will allow you to tune in real time. We have extensive
experience with these
products, for more info contact us at 877-729-4754. We also offer PC
V for several pre-09 applications, for more info click here
PC-V Retrofit units
For a complete list
of available Dynojet Power Commanders including Fuel Moto PC-V
retrofits
click here
For Pre-2009 Power Commander V
click PC-V Retrofit
For Harley Power Commander V click
here
Auto Tune module
New for the PC V is the available
add-on Auto Tune module which allows for live, closed loop EFI
tuning. Based closely on Dynojet's new Wideband Commander 2 it
features a OEM quality Bosch Wideband O2 sensor. The Auto tune
module allows users set a demanded air/fuel ratio in the PC V
software and the Auto tune will make adjustments in real time. When
enabled there is an AFR table with the same 250 RPM increment
resolution as the fuel table. The Auto tune can be configured for
minimum run time before live sample as well as maximum +/- fuel
adjustments in relation to the base map. The Auto Tune kit can also
use the Dynojet map switch or any open/closed switch which allows
the user to switch between live tuning to the parameters set thru
the PC V software or the base map in the PC V unit. You can leave
the map switch in "live" mode, or if you want to write the fuel map
you can connect to the PC V software, retrieve the fuel trims and
either write them to the map or clear them. The firmware and tuning
strategy has been well written and in our testing we have been able
to develop very, very accurate maps using the Auto Tune module
opposed to some of the other Auto tune units on the market we have
tested in the past. We have also compared several Auto Tune derived
maps to dyno tuned maps and the results were impressive. A very
important requirement for building a good tune is to have a close
base map to start out with, as the Auto Tune writes its fuel trims
off the base PC V map. The Auto Tune module does require some basic
wiring from the sensor harness into the modules. The Auto Tune
module is a very good choice for those with a unique mods, where a
dyno is not available, or for those looking for the ability to tune
in real time. The ultimate combination we recommend is combining a
full dyno tune session with the Auto tune. We build the map for the
best combination of performance and efficiency, and then implement
the AFR's we developed into the Auto Tune AFR table. This strategy
will provide the best performance under all conditions.
Auto Tune modules are in stock and
we also have several excellent AFR tables we can supply to fit your
riding style or requirements. If you purchase the PC-V and Auto Tune
module we can program and configure everything so it is ready to
plug in and ride.
Why purchase a Dynojet Power Commander V
from Fuel Moto?
|
Dynojet
Power Commanders are our main business. We offer the
best service in the industry. We install and tune
Power Commanders all day, every day. We are highly
commited to Dynojet products are are the #1 Power
Commander dealer in the USA. We sell, install and
tune more Power Commanders than anyone, when you
contact Fuel Moto you will be working directly with
the EFI Tuning Professionals. Our certified
Dynojet tech's will take the time to answer any
technical, installation or pricing questions you may
have on any Dynojet product we carry anytime, before
or after the sale. Give us a call toll free at
877-729-4754
Fuel Moto even purchases various new motorcycles to
use exclusively for testing and development of our
Power Commander maps. This in-house development
allows us to offer our customers unmatched product
support with our database of Power Commander maps
and technical information.
|
|
Fuel
Moto is an official Dynojet Tuning Center as well as
an authorized Power Commander dealer. When you
purchase a Power Commander from Fuel Moto you
purchase more than just a Power Commander. Our
professional staff is here to make your bike run at
it's best . You will be receiving a custom tuned
fuel injection module that comes to you
pre-programmed for your personal bike based on the
information you provide. We are not simply loading a
map, we are programming the Power Commander with
maps and information that has been developed for the
intake and exhaust changes you have made to your
bike using our experience and expertise from 12+
years of dyno tuning. At Fuel Moto we pride
ourselves as being at the very top of the motorcycle
EFI tuning trade, we have even developed several
proprietary components and applications for our
Dynojet 250i dyno which allow us to have the most
consistent, most accurate and best performing EFI
maps available. We have the largest map database in
the country, and we continually develop new maps
in-house. Our expertise and maps have become well
known across the USA. We live, breath and race
motorcycles and have a true passion for tuning. With
our Power Commanders we offer a complete tuning
package, from the Power Commander unit, to the
programming, to the certified Dynojet technical
support. There are several features will can add to
your Power Commander for no additional cost. We can
download and set up the Accelerator pump feature
which increases throttle response and off idle
abruptness. We can also take into consideration your
riding style or special concerns such as fuel
mileage. What this means is when you receive your
Power Commander it will come to you "plug and play"
so you are ready to install and ride. Feel free to
contact us for details how the Power Commander will
improve your specific bike. Fuel Moto doubles the
warranty on the Power Commander making the warranty
period 2 years. Furthermore, if you purchase a Power
Commander from Fuel Moto we offer Map support and
will supply you with any different maps you may need
as you make future mods to your bike. We also
provide in-house certified Dynojet technical support
on the Power Commander so if you have any questions
or problems along the way on programming or tuning
we are just a call away. Dynojet periodically makes
changes and upgrades to the Power Commander, our
Power Commanders are guaranteed to be the absolute
latest version with the latest firmware and upgrades
enabled. If you have technical questions before or
after the sale you
can contact Jamie by phone toll free 1-877-729-4754
or email me at
jamie@fuelmotousa.com and I will be there to
help. Simply put, you will not find better customer
service and product support anywhere! |
|
Free Power Commander
Programming!