Dynojet Power Commander V Retrofit by Fuel Moto

Fuel Moto offers Power Commander V Retrofit units for many pre-09 applications.  Dynojet does not offer maps or product support for PC V when used on pre-09 bikes, however Fuel Moto offers fuel maps and 100% product support on our Retrofit units including a 2 year warranty. Retrofit units will come pre-programmed and configured by our technical dept for your application, mapped for your specific mods and ready to install with specific instructions for your bike. We have a large database of PC V fuel maps which we support and this new module brings tuning to a whole new level. Benefits of the PC V over PC III USB are its smaller size, the ability to add the Auto Tune module for live tuning, and the expanded tuning features for advanced users. We have many applications tested and ready, and we will continue to add to the list of applicable Retrofit units as they become available for each model.

Auto Tune module is also available for all PC-V applications

Current PC V Retrofit applications:

Harley Davidson:
2008 Harley Touring model
2007 Harley Touring model
02-06 Harley Touring models
07-08 Harley Dyna models
04-06 Harley Dyna models
07-08 Harley Softail models
01-06 Harley Softail models
07-08 Harley Sportster models
02-08 Harley V Rod

Honda:
07-09 Honda CBR600RR
05-06 Honda CBR600RR
08 Honda CBR1000RR
00-08 Honda VFR800
05-08 Honda VTX1800

Suzuki:
06-08 Suzuki LTR450
08 Suzuki GSXR 600/750
06-07 Suzuki GSXR 600/750
04-05 Suzuki GSXR 600/750
07-08 Suzuki GSXR 1000
2008 Suzuki Hayabusa
2008 Suzuki B King
02-08 DL1000

Kawasaki:
08 Kawasaki KFX450
08 Kawasaki Concours
08 Kawasaki ZX14
06-07 Kawasaki ZX14
08 Kawasaki ZX10R
06-08 Kawasaki VN900
07-08 Kawasaki Versys
06-08 Kawasaki EX650R

Yamaha:
06-08 Yamaha Raptor 700
2008 Yamaha YZF R6
06-07 Yamaha YZF R6
03-08 Yamaha YZF R6/R6S
04-06 Yamaha YZF R1
06-07 Yamaha FZ1
06-08 Yamaha FJR 1300
02-08 Yamaha Roadstar Warrior
06-09 Yamaha Stratoliner/Roadliner
07-08 Yamaha XV1300

 
 
NEW Power Commander V Basic Features List
• Reduced size from PCIIIusb (less than half of the size of PCIII)
• USB powered from computer (9 volt adapter is no longer needed for programming)
• 2 position map switching function built in (map switch not included)
• Gear/Speed input (allows for map adjustment based on gear and speed)
• Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
• With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables).
• Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes
• 10 throttle position columns (up from 9 on PCIIIusb)
• Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)